ABB ACS800 Series - Page 194

Additional data: actual signals and parameters
182
27 BRAKE CHOPPER
27.01 BRAKE CHOPPER CTL OFF OFF OFF OFF OFF 526
27.02 BR OVERLOAD FUNC NO NO NO NO NO 527
27.03 BR RESISTANCE 528
27.04BR THERM TCONST0 s0 s0 s0 s0 s529
27.05 MAX CONT BR POWER 0 kW 0 kW 0 kW 0 kW 0 kW 530
27.06 BR CTRL MODE AS
GENERATOR
AS
GENERATOR
AS
GENERATOR
AS
GENERATOR
AS
GENERATOR
531
30 FAULT FUNCTIONS
30.04 MOTOR THERM PROT FAULT FAULT FAULT FAULT FAULT 604
30.05 MOT THERM P MODE DTC DTC DTC DTC DTC 605
30.06 MOTOR THERM TIME (calculated) (calculated) (calculated) (calculated) (calculated) 606
30.07 MOTOR LOAD CURVE 100.0% 100.0% 100.0% 100.0% 100.0% 607
30.08 ZERO SPEED LOAD 74.0% 74.0% 74.0% 74.0% 74.0% 608
30.09 BREAK POINT 54.0 Hz 54.0 Hz 54.0 Hz 54.0 Hz 54.0 Hz 609
30.10 STALL FUNCTION NO NO NO NO NO 610
30.11 STALL FREQ HI 20.0 Hz 20.0 Hz 20.0 Hz 20.0 Hz 20.0 Hz 611
30.12 STALL TIME 20.00 s 20.00 s 20.00 s 20.00 s 20.00 s 612
30.13 UNDERLOAD FUNC NO NO NO NO NO 613
30.14 UNDERLOAD TIME 600 s 600 s 600 s 600 s 600 s 614
30.15 UNDERLOAD CURVE 11111615
30.16 MOTOR PHASE LOSS NO NO NO NO NO 616
30.17 GROUND FAULT FAULT FAULT FAULT FAULT FAULT 617
30.18 COMM FLT FUNC NO ERR CHK NO ERR CHK NO ERR CHK NO ERR CHK NO ERR CHK 618
30.19 COMM TIMEOUT 1000 ms 1000 ms 1000 ms 1000 ms 1000 ms 619
32 SUPERVISION
32.01 SPEED1 FUNCTION NO NO NO NO NO 651
32.02 SPEED1 LIMIT 0 rpm 0 rpm 0 rpm 0 rpm 0 rpm 652
32.07 TORQUE1 FUNCTION NO NO NO NO NO 657
32.08TORQUE1 LIMIT0%0%0%0%0%658
32.09 TORQUE2 FUNCTION NO NO NO NO NO 659
32.10TORQUE2 LIMIT0%0%0%0%0%660
32.11 REF1 FUNCTION NO NO NO NO NO 661
32.12 REF1 LIMIT 0 rpm 0 rpm 0 rpm 0 rpm 0 rpm 662
33 INFORMATION
33.01 SOFTWARE VERSION (version) (version) (version) (version) (version) 676
33.02 APPL SW VERSION (version) (version) (version) (version) (version) 677
33.03 APPL RELEASE DATE (date) (date) (date) (date) (date) 678
33.04 BOARD TYPE (Control board
type)
(Control board
type)
(Control board
type)
(Control board
type)
(Control board
type)
679
35 MTR TEMP MEAS
35.01 MTR1 TEMP SEL NOT IN USE NOT IN USE NOT IN USE NOT IN USE NOT IN USE 726
35.02 MTR1 TEMP ALM LVL 110 C 110 C 110 C 110 C 110 C 727
35.03 MTR1 TEMP FLT LVL 130 C 130 C 130 C 130 C 130 C 728
35.04 MTR2 TEMP SEL NOT IN USE NOT IN USE NOT IN USE NOT IN USE NOT IN USE 729
35.05 MTR2 TEMP ALM LVL 110 C 110 C 110 C 110 C 110 C 730
35.06 MTR2 TEMP FLT LVL 130 C 130 C 130 C 130 C 130 C 731
35.07 MTR MODEL COMP YES YES YES YES YES 732
50 PULSE ENCODER
50.01 PULSE NR 2048 2048 2048 2048 2048 1001
50.02 SPEED MEAS MODE A_-_ B_-_ A_-_ B_-_ A_-_ B_-_ A_-_ B_-_ A_-_ B_-_ 1002
50.03 ENCODER FAULT WARNING WARNING WARNING WARNING WARNING 1003
50.04 ENCODER DELAY 1000 ms 1000 ms 1000 ms 1000 ms 1000 ms 1004
50.05 ENCODER CHANNEL CH 1 CH 1 CH 1 CH 1 CH 1 1005
50.06 SPEED FDBK SEL INTERNAL INTERNAL INTERNAL INTERNAL INTERNAL 1006
50.07 NTAC FILTER TIME 2 ms 2 ms 2 ms 2 ms 2 ms 1007
Index Name/Selection UNWIND
TENSION
UNWIND
DANCER
WINDER
TENSION
WINDER
DANCER
WINDER
LEAD
PB