Clean room suitability, robot
The table shows the suitability for clean room environment for the valid protection
types of the robot.
Protection classProtection type
ISO Class 4
i
Manipulator, suitability class (protection type Standard)
i
According to ISO 14644-1 / ISO 14644-14.
Harsh environment
The manipulator complies with the following harsh environment.
According toParameter
ISA–71.04-2013 G3Flowing, mixed gas corrosion test
Harsh Group A
DIN EN 60068-2-60
Components and concentrations of the mixed corrosive gas:
• Hydrogen sulphide (H
2
S): 50 ppb
• Nitrogen dioxide (NO
2
): 1,250 ppb
• Chlorine (Cl
2
): 10 ppb
• Sulphur dioxide (SO
2
): 300 ppb
Environmental information
The product complies with IEC 63000. Technical documentation for the assessment
of electrical and electronic products with respect to the restriction of hazardous
substances.
Joint torques
In collaborative applications, the joint torque must be considered in the risk
assessment. The following table shows the maximum torque for each joint. The
maximum value can be achieved on one axis at a time.
Maximum joint torqueAxis
175.44 Nm1
175.44 Nm2
90.6 Nm3
18.72 Nm4
21.44 Nm5
9.2 Nm6
44 Product manual - CRB 15000
3HAC077389-001 Revision: L
© Copyright 2021 - 2023 ABB. All rights reserved.
2 Manipulator description
2.2 Technical data
Continued
To Next Page
