9.6 Standard toolkit
General
All service (repairs, maintenance, and installation) procedures contains lists of
tools required to perform the specified activity.
All special tools required are listed directly in the procedures while all the tools
that are considered standard are gathered in the standard toolkit and defined in
the following table.
This way, the tools required are the sum of the standard toolkit and any tools listed
in the instruction.
Contents, standard toolkit
NoteToolQty
Torque wrench, 0.2-4.6 Nm1
Hexagon bit socket head cap, size 1.5 mm1
Hexagon bit socket head cap, size 2 mm1
Hexagon bit socket head cap, size 2.5 mm1
Hexagon bit socket head cap, size 3 mm1
Tweezer1
Cable ties1
Product manual - CRB 15000 1087
3HAC077389-001 Revision: L
© Copyright 2021 - 2023 ABB. All rights reserved.
9 Reference information
9.6 Standard toolkit
To Next Page
Loading...
