5.4.3 Replacing the tubular
Location of the tubular
The tubular is located as shown in the figure.
xx2100000052
Summary of the replacement procedure
This is a brief summary of the replacement procedure, containing the major actions
to be performed.
1 Separate the cabling between the housing and the tubular (at the axis-3 joint
unit).
2 Remove the complete tubular.
3 Remove the axis-4 joint unit.
Continues on next page
562 Product manual - CRB 15000
3HAC077389-001 Revision: L
© Copyright 2021 - 2023 ABB. All rights reserved.
5 Repair
5.4.3 Replacing the tubular
To Next Page
Loading...
