Section D Graphic Display
D-80
D 7.4.10 Copy
→Select one or more graphic objects → Edit → Copy .
→Select one or more graphic objects → CTRL +C.
The selected graphic objects are copied and saved in a buffer memory (not the standard
Windows clipboard).
With Paste the saved objects can be inserted into the graphic one or more times. The
copied object is copied to match the original and displayed as it was when selected. It
can be moved to any position. See page D-75, Move a graphic object.
D 7.4.11 Paste
→Edit → Paste .
→CTRL +V.
The graphic objects which were saved in the buffer memory (not the standard Windows
clipboard) via a Cut or Copy command can be inserted into the draw area.
Items are inserted at the location from which they were cut or copied.
D 7.4.12 Delete
→Select one or more graphic objects → Edit → Delete .
→Select one or more graphic objects → DELETE.
The selected graphic objects are removed from the draw area.
Gross Automation, 1725 South Johnson Road, New Berlin, WI 53146, www.ssacsales.com, 800-349-5827
To Next Page