Section C Standard Displays
C-12
C 3.2 Create a new group display
A group display is created and processed in the project tree beneath a resource operator sta-
tion or in the general pool. For a detailed description see Engineering Manual, System Con-
figuration, Project Tree.
Project tree menu → Edit → Insert below/above → Group display
If a group display is configured in the general display pool, this overview display will be
available in all operator stations.
C 3.3 Group display configuration
→ DOUBLE CLICK the name of the group display in the project tree
Tags that had been entered but were later deleted, are displayed in red in the configura-
tion mask and are reported as non-existent in the error list during a plausibility check.
Short text A maximum of 12 characters are assigned to group display
Long text A maximum of 30 characters are assigned to a group display
tt0007us.bmp
Gross Automation, 1725 South Johnson Road, New Berlin, WI 53146, www.ssacsales.com, 800-349-5827
To Next Page
Loading...