ABB Freelance 2000 - E 2.3 Format Tab - Signal Sequence Log 1 and N

Section E Logs
E-11
E 2.3 Format tab - Signal sequence log 1 and N
Logging format
Active going
Inactive going The logging format for incoming and outgoing messages can be assigned
to priority levels S1 to 5. Here one can select between Empty, Value, Long
text and all.
Operat.: If operator interventions should be logged, a format other than Empty must
be provided at Operat.
If the optional program DigiLock is installed on the operator station,
the logged user name at this particular time will also listed during the
logging of every operator intervention.
Logging format of acknowledge from
Message line / list Like above format without coming intervention messages (message line
and message list) and messages of priority level 5 (message list), but only
refers to acknowledge in message line and message list.
di1320uk.bmp
Gross Automation, 1725 South Johnson Road, New Berlin, WI 53146, www.ssacsales.com, 800-349-5827