ABB Freelance 2000 - A 2 General Hints for Operating Digitool; A 2.1 Operation with Mouse or Keyboard

Section A General Information
A-6
A 2 General Hints for Operating DigiTool
Operation of DigiTool is based on the Windows Standard.
Therefore knowledge of general operation under Windows is strongly recommended, see
Windows Manual.
The "typical Windows operation" will therefore not be dealt with in detail when describing the
various editors.
A 2.1 Operation with mouse or keyboard
Mouse Keyboard
Select menu
items
Cursor on menu item
+ left mouse button.
ALT + underlined letters
Select within
pull-down menu
Cursor on menu item
+ left mouse button.
Enter only underline letters
Select individual
elements
Cursor on program element
+ left mouse button
Cursor on program element
+S
PACE
Select multiple
elements
Cursor on start position
→ press left mouse button and
keep pressed down
→ move to desired position and
release mouse button
Cursor on start position
→ Press S
PACE and hold
→ move to desired position and
release SPACE
Gross Automation, 1725 South Johnson Road, New Berlin, WI 53146, www.ssacsales.com, 800-349-5827