Section E Logs
E-17
Start/Stop
Automatic Logging is automatically started by starting DigiVis.
Event controlled Logging is started and stopped by an event.
Tag name of event
function block Name of event starting logging,
see Engineering Reference Manual, Functions and Function Blocks,
Monitoring Function Blocks.
Press the function key F2 to bring up a selection list.
Manual The operator can start and stop logging on the operator station. This refers
only to the log previously selected on the operator station.
Filing
in .. files the number of log files are fixed, which are created on DigiVis PC. The
value must be between 1 and 400.
named the name of the log file, which is filed on DigiVis PC hard disk. The preset
name can be accepted, or a new one given.
With max. runtime
... per file The recording period per log file can be defined with this field. Entries are
made in the IEC 1131-3 format. The value range is between 0 and 2147483
sec.
Example:
T#2147483s or T#24d20h31m23s
Allocated disturbance
course log function block
Name of the disturbance course log acquisition module on the process sta-
tion, see Engineering Reference Manual, Functions and Function
Blocks, Acquisition Blocks.PressthefunctionkeyF2tobringupase-
lection list.
Disk space
requirements
for this log: The size which log files can attain is displayed in this field. This requirement
should be available on DigiVis PC.
To Next Page
Loading...