Section E Logs
E-24
D
YNAMIC During DYNAMIC a variable is selected, and its current value should be re-
corded in the log. Dynamic entries are shown in square brackets.
DYNAMIC → Select variable → OK
To retrospectively assign a different value to a format, position the
cursor between the square brackets and push D
YNAMIC.
F
ORMAT A variable is assigned to a display format, e.g. the number of digits after
decimal will be defined.
FORMAT → select format → OK
To assign later an other format to a variable, take position between
the square brackets and push FORMAT.
P
RINT PREVIEW The forthcoming PRINT PREVIEW of the operation log is displayed. Only the
format specification and text are still visible in the print preview. The square
brackets and the variable names are not displayed.
Variable names cannot be changed in the print preview display.
Back to the parameter mask for inputs → E
DIT
PRINT AS TABLE The operation log is printed out in tabular form. This means that the part
with the dynamic area is repeated, indeed it is repeated as many times
as the page layout allows
Gross Automation, 1725 South Johnson Road, New Berlin, WI 53146, www.ssacsales.com, 800-349-5827
To Next Page
Loading...