Section B Messages and Hints
B-21
Priority Priority of the message with indication of whether incoming or outgoing.
Group System message group; specified by system.
Time Time of occurrence of the message. The resolution is 1/1000s.
Plant area Plant area to which the tag name is allocated.
Tag name Name of the tag which generated the message.
S text Short text for the tag.
L-text Long text for the tag.
St-text Status text of the message.
Measured value Measured value registered when the message was generated, e.g. limit
value.
Dim Dimension of the measured value.
Type Every message has a message type. For limit values, the message type
is the limit value type (e.g. HH for the second high limit value).
Date Only shown with the first message and after a date change. A date
change is indicated by a horizontal red line.
Fault text Explains the fault which has occurred in the case of a system message.
Message order Fixes the position of the current message in the message list. Thus the
current message appears at the top or bottom of the message list.
Message line
Message order Determines the position of the oldest message in the message line. Thus
with the current message right, the message line will be filled with new
messages from left to right.
Acknowledge
type With Acknowledge it is possible to choose between visual acknowledg-
ment and acknowledgment.
With visual acknowledge the VA button appears in the message line.
Messages in the message line are only visually acknowledged and must
be acknowledged in the message list.
With acknowledge the A button appears in the message line. Messages
in the message line are acknowledged normally.
To Next Page
Loading...