Section C Standard Displays
C-20
Band end The Band end specifies the value for the scale end of the Y-axis for de-
picting and for the individual trend. See figure below.
Values entered as real numbers. The value range is
0.0 - ±9999999999.9. The value for the band end must be greater than
the value for the band start.
% The percentage value specifies the position of the scale end for Band end
% on the Y-axis. See figure below.
The percentage values must be entered as integers. The value range is
0 - ±5000%.
Example of a trend display:
The following settings have been chosen for the parameter definition of the position:
Band end: -10.0 Band end: 110.0
Band start %: 20 Band end %: 80
di1311.bmp
Gross Automation, 1725 South Johnson Road, New Berlin, WI 53146, www.ssacsales.com, 800-349-5827
To Next Page
Loading...