ABB IRB 1200 - Page 397

NoteAction
CAUTION
For robots with protection type Clean Room
For robots with food grade lubrication
For robots with protection type Hygienic
Always cut the paint with a knife and grind the
paint edge when disassembling parts of the robot!
See Cut the paint or surface on the robot before
replacing parts on page 158.
2
xx1300002353
Disconnect the connectors shown in the figure.3
xx1300002355
Disconnect the air hoses.4
xx1300002356
Remove the connector plate attachment screws.5
Continues on next page
Product manual - IRB 1200 397
3HAC046983-001 Revision: S
© Copyright 2014 - 2021 ABB. All rights reserved.
4 Repair
4.4.3 Replacing the tubular spare parts
Continued