ABB IRB 2600 Series - Page 299

NoteAction
xx1800000881
Valid for IRB 2600-20/1.65, IRB 2600-
12/1.65, IRB 2600-12/1.85, IRB 2600ID-
15/1.85, IRB 2600ID-8/2.0:
Refit the expansion container, if available.
11
Apply some grease to the o-ring and refit
the o-ring between the cover and base.
12
Attachment screws: M6x16 quality 8.8-
A2F (5 pcs)
xx1800000879
Refit the cover plate at the bottom of the
base with its attachment screws.
13
xx1800000875
Remove the screws that secure the support
legs to the foundation.
DANGER
Stretch the roundslings to make sure that
the robot weight is secured.
14
xx1800000874
Lift the complete robot and remove the
support legs from the base.
15
Continues on next page
Product manual - IRB 2600 299
3HAC035504-001 Revision: Q
© Copyright 2009-2018 ABB. All rights reserved.
4 Repair
4.6.2 Replacing the base
Continued