ABB IRB 2600 Series - Page 323

InformationAction
A
xx1400002570
IRB 2600 standard, motor type B
Applicable to motor axis 3!
Make sure that the wire exit holes of motor axis
3 is in the correct position. See illustration!
5
Parts:
• A: Wire exit hole, motor axis 3
xx0900000375
IRB 2600 standard, motor type A
Applicable to motor axis 3!
Make sure that the wire exit holes of motor axis
3 is in the correct position. See illustration!
6
Parts:
• A: Wire exit hole, motor axis 3
Continues on next page
Product manual - IRB 2600 323
3HAC035504-001 Revision: Q
© Copyright 2009-2018 ABB. All rights reserved.
4 Repair
4.7.2 Refitting motors
Continued