ABB IRB 2600 Series - Page 337

InformationAction
Tightening torque: 10 Nm.
xx1000001001
Secure the cover with its attachment
screws.
10
Parts:
A Attachment screws (6 pcs) M6x20
quality 8.8-A2F
B Cover
C Attachment screws (8 pcs) M8x25
quality Steel 12.9 Gleitmo
xx1000000998
Secure the cable harness with its attach-
ment screws to the upper armtube.
11
Parts:
A Bracket
B Attachment screws (2 pcs)
C Connectors motor axis 5
D Motor axis 5
See section
• Replacing the cable harness in the
upper arm - IRB 2600ID on page 222
Check that the spiral of the cable harness
is fitted correctly.
12
Tightening torque: 35 Nm.
A
xx1000000936
Secure the upper arm tube with its attach-
ment screws.
13
Parts:
A Attachment screws (8 pcs)
Continues on next page
Product manual - IRB 2600 337
3HAC035504-001 Revision: Q
© Copyright 2009-2018 ABB. All rights reserved.
4 Repair
4.7.3 Replacing motor axis 5 - IRB 2600ID
Continued