ABB IRB 2600 Series - Page 338

InformationAction
xx1000001003
Apply flange sealing (Loctite 574) on the
surface shown in the figure.
Note
Do not apply flange sealing on the surfaces
where Sikaflex 521FC shall be applied!
See figure!
14
Parts:
A Surface where Sikaflex 521FC shall
be applied
B Surface where Loctite 574 shall be
applied.
xx1000000879
Refit the cover with two inner attachment
screws.
15
Parts:
A Attachment screws (5 pcs)
B Mechanical stop
C O-ring
D Distance ring
E Bracket
F Cover
See figure above.Refit the bracket with the remaining attach-
ment screws.
16
Continues on next page
338 Product manual - IRB 2600
3HAC035504-001 Revision: Q
© Copyright 2009-2018 ABB. All rights reserved.
4 Repair
4.7.3 Replacing motor axis 5 - IRB 2600ID
Continued