EasyManua.ls Logo

ABB IRB 5720 - Page 518

ABB IRB 5720
610 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Attaching the lifting accessories to the upper arm
NoteAction
CAUTION
The weight of the complete upper arm (in-
cluding the wrist) is
IRB 5720-180/2.6, IRB 5720-155/2.6 LID:
310 kg
IRB 5720-125/3.0, IRB 5720-90/3.0 LID: 260
kg
All lifting accessories used must be sized
accordingly.
1
Lifting eye: 3HAC16131-1Fit a lifting eye in the arm house, with a
fender washer underneath.
xx1400002196
2
Fender washer: Outer diameter: minimum
26 mm, maximum 30 mm, hole diameter:
13 mm, thickness: 3 mm.
xx2100002146
Lifting accessory (chain): 3HAC15556-1Attach the upper arm lifting accessory
(chain) to the lifting eye, to an overhead
crane (or similar) and then to a roundsling
in the wrist.
3
Roundsling, 1.5 m: -
xx2100002145
Approximate length of the chain:
(a): 1,200 mm
(b): 1,420 mm
Raise the lifting accessories to take the
weight of the upper arm.
4
Continues on next page
518 Product manual - IRB 5720
3HAC079195-001 Revision: A
© Copyright 2022 ABB. All rights reserved.
5 Repair
5.9.3 Replacing the axis-3 gearbox
Continued

Table of Contents

Related product manuals