NoteAction
CAUTION
When fitting the motor cover, make sure
that none of the cables inside will be dam-
aged.
6
Hex socket head cap screw: M5x16 12.9
Lafre 2C2B/FC6.9 (6 pcs)
Refit the motor cover.7
Tightening torque: 4 Nm.
xx2000000376
Refitting the turning disc
NoteAction
Wipe clean the contact surfaces.1
Rust preventive: 3HAC034903-001
( Mercasol 3110 Waxcoat. Recom-
mended drying time is 24h.)
xx2100002232
Protection type Foundry Plus:
Apply rust preventive to the surface shown in the
figure.
2
Continues on next page
Product manual - IRB 5720 555
3HAC079195-001 Revision: A
© Copyright 2022 ABB. All rights reserved.
5 Repair
5.9.4 Replacing the axis-6 gearbox
Continued
To Next Page
Loading...
