Location of FlexPendant connector
The FlexPendant connector is located on the front panel on the controller.
xx1700001061
FlexPendant connectorA
Detaching the FlexPendant in automatic mode
Use the following procedure to detach the FlexPendant in automatic mode:
1 On the status bar, tap the QuickSet button.
2 Tap the Logout/Restart tab.
3 In the FlexPendant section, tap Detach FlexPendant.
Continues on next page
Product manual - OmniCore C30 101
3HAC060860-001 Revision: P
© Copyright 2019-2022 ABB. All rights reserved.
3 Installation and commissioning
3.5.6 Detaching and attaching a FlexPendant
Continued
To Next Page
Loading...
