ABB OmniCore C30 - Installing the Fieldbus Master and the Devicenet Harness

3.7.5 Installing the fieldbus master and the DeviceNet harness
Location
The illustration shows the location of the fieldbus master in the main computer.
xx1800003420
Harness DeviceNet is an option of process connector.
The illustration shows the location of the harness DeviceNet in the controller.
xx1800000737
Note
The DeviceNet board and the DeviceNet harness must be installed at the same
time.
Continues on next page
Product manual - OmniCore C30 167
3HAC060860-001 Revision: P
© Copyright 2019-2022 ABB. All rights reserved.
3 Installation and commissioning
3.7.5 Installing the fieldbus master and the DeviceNet harness