ABB OmniCore C30 User Manual

5.2.3.1 Replacing the standard fans
Note
There are two types of Standard fan used in OmniCore C30.
Make sure which type is used in your machine before do the replacement
procedure.
Note
The replacement of the old fan and the new fan are both listed in this chapter,
please refer to the correct procedure that you need.
• Replacing the standard fan on page 239
• Replacing the standard fan to a standard size silent fan unit on page 243
• Replacing the standard size silent fan unit on page 247
Continues on next page
238 Product manual - OmniCore C30
3HAC060860-001 Revision: P
© Copyright 2019-2022 ABB. All rights reserved.
5 Repair
5.2.3.1 Replacing the standard fans

ABB OmniCore C30 Specifications

General

Brand	ABB
Model	OmniCore C30
Category	Controller
Language	English