ABB OmniCore C30 User Manual

6.2 Troubleshooting fault symptoms
Fault symptoms described in this manual
This manual describes how to troubleshoot the following fault symptoms:
• No LEDs are lit on the controller on page 502
• Start-up failure on page 507
• Problem releasing the robot brakes on page 512
• Problem starting or connecting the FlexPendant on page 517
• Problem using the joystick on page 522
• Controller fails to start on page 523
• Reflashing firmware failure on page 524
• Inconsistent path accuracy on page 525
Continues on next page
Product manual - OmniCore C30 501
3HAC060860-001 Revision: P
© Copyright 2019-2022 ABB. All rights reserved.
6 Troubleshooting
6.2 Troubleshooting fault symptoms

ABB OmniCore C30 Specifications

General

Brand	ABB
Model	OmniCore C30
Category	Controller
Language	English