ABB OmniCore C30 User Manual

3.4.5 Mounting the controller with desktop mounting kit [3001-2]
General
The OmniCore C30 controller is designed to fit as a desk version, that can have a
desktop mounting kit.
xx1700001887
Note
If the desktop mounting kit is mounted to the controller, do not hold the TPU
connector (X4) during any moving or transporting of the controller.
Required equipment
InformationEquipment
3HAC063919-001Mounting kit
See Standard toolkit for controller on
page 570.
Standard toolkit
Procedure
Use this procedure to install the desktop mounting kit on the controller.
Info/illustrationAction
xx1700000735
Remove the top cover from the controller.1
Continues on next page
Product manual - OmniCore C30 71
3HAC060860-001 Revision: P
© Copyright 2019-2022 ABB. All rights reserved.
3 Installation and commissioning
3.4.5 Mounting the controller with desktop mounting kit [3001-2]

ABB OmniCore C30 Specifications

General

Brand	ABB
Model	OmniCore C30
Category	Controller
Language	English