3.7 Installing options
3.7.1 Installing the harness for double SMB
Location
The illustration shows the location of the harness double SMB in the controller.
xx1800000037
Required spare parts
Note
The spare part numbers that are listed in the table can be out of date. See the
latest spare parts of the OmniCore C30 via myABB Business Portal,
www.abb.com/myABB.
NoteArticle numberSpare part
Harness single SMB3HAC068537-001Harness Single SMB connection
Harness double SMB3HAC067490-001Harness Double SMB connection
Required tools and equipment
NoteArticle numberEquipment
Content is defined in section
Standard toolkit for controller on
page 570.
-Standard toolkit
-ESD protective wrist band
Continues on next page
136 Product manual - OmniCore C30
3HAC060860-001 Revision: P
© Copyright 2019-2022 ABB. All rights reserved.
3 Installation and commissioning
3.7.1 Installing the harness for double SMB
To Next Page
Loading...
