ABB OmniCore C30 User Manual

3.4.6 Mounting the FlexPendant holder
Note
To avoid dropping the FlexPendant from height, the holder should be placed in
a comfortable working height.
Always use and store the FlexPendant in such a way that the cable does not
become a tripping hazard.
When not using the device, place it so it does not accidentally fall.
Required equipment
NoteSpare part numberEquipment
See Standard toolkit for con-
troller on page 570.
Standard toolkit
3HAC064927-001FlexPendant Holder w/t E-
stop cover
Note
The FlexPendant should always be placed in the holder when it is not used and
it is not allowed to use by unauthorized person.
Continues on next page
Product manual - OmniCore C30 75
3HAC060860-001 Revision: P
© Copyright 2019-2022 ABB. All rights reserved.
3 Installation and commissioning
3.4.6 Mounting the FlexPendant holder

ABB OmniCore C30 Specifications

General

Brand	ABB
Model	OmniCore C30
Category	Controller
Language	English