ABB OmniCore C30 User Manual

4 Maintenance
4.1 Maintenance schedule, OmniCore
General
The controller must be maintained at regular intervals to ensure its function. The
activities and intervals are described in this section.
Activities and intervals
Detailed in section:IntervalMaintenance
activity
Equipment
Inspecting the OmniCore C30 con-
troller on page 203
12 months
i
InspectionComplete controller
Replacement of air filter element
for the controller with vertical
mounting kit on page 208
24 months *ReplacementAir filter element
Inspecting the OmniCore C30 con-
troller on page 203
6 months
i
InspectionSystem fans
Cleaning of the controller cabinet
on page 205
CleaningControl cabinet
Cleaning the FlexPendant on
page 206
When neededCleaningFlexPendant
Function test of emergency stop on
page 212
12 monthsFunction testEmergency stop
(FlexPendant)
Function test of manual, auto, and
manual full speed mode with Flex-
Pendant on page 213
12 monthsFunction testManual, auto and
manual full speed
mode with FlexPend-
ant
Function test of three-position en-
abling device on page 214
12 monthsFunction testEnable device
Function test of safety switches on
page 215
12 monthsFunction testSafety switches
Function test of Automatic Stop on
page 216
12 monthsFunction testAuto stop (tested if
used)
Function test of General Stop on
page 217
12 monthsFunction testGeneral stop (tested
if used)
Function test of external emergency
stop on page 218
12 monthsFunction testExternal emergency
stop (tested if used)
Function test of ESTOP_STATUS
output on page 219
12 monthsFunction testESTOP_STATUS
output (tested if
used)
Function test of reduced speed
control on page 220.
During commis-
sioning
Function testReduced speed
control
i
The interval depends on the working environment of the equipment: a cleaner environment may
extend the maintenance interval and vice versa.
Continues on next page
Product manual - OmniCore C30 201
3HAC060860-001 Revision: P
© Copyright 2019-2022 ABB. All rights reserved.
4 Maintenance
4.1 Maintenance schedule, OmniCore

ABB OmniCore C30 Specifications

General

Brand	ABB
Model	OmniCore C30
Category	Controller
Language	English