3.4 On-site installation
3.4.1 Required installation space
Dimensions
The following illustration shows the required installation space for the OmniCore
C30 controller. A free space is required for connecting ABB cables. Do not place
any cables over the left and right covers (top cover for the vertical-mounted version)
as it leads to inefficient cooling.
Base-mounted and Rack-mounted version
549 mm
50 mm
50 mm
493.5 mm
50 mm
150 mm
xx1700001055
RightLeftBackFrontFree space
50 mm50 mm50 mm150 mmBase-mounted
50 mm50 mm50 mm150 mmRack-mounted
Continues on next page
Product manual - OmniCore C30 57
3HAC060860-001 Revision: P
© Copyright 2019-2022 ABB. All rights reserved.
3 Installation and commissioning
3.4.1 Required installation space
To Next Page
Loading...
