5.2.7 Replacing the scalable I/O unit
Location
The illustration shows the location of the scalable I/O in the controller.
X14 X15
MS
AS1/GS1
AS2/GS2
ES1
ES2
ESOUT1
ESOUT2
MON
AC
PS
PC
HMI
EP
I/O
X0
Q0
X4
X2
X3
X1
PC PWR
PC HDD
ABB Ability™
ETHERNET SWITCH
X18
WAN LAN MGMT
X19
X20
PC STAT
xx1800000032
Note
To confirm whether this unit is available in your controller, see chapter Overview
of the controller on page 38.
If this unit is not available in your controller, ignore the related procedure to this
unit when you do any maintenance or repair work.
Required spare parts
Note
The spare part numbers that are listed in the table can be out of date. See the
latest spare parts of the OmniCore C30 via myABB Business Portal,
www.abb.com/myABB.
NoteArticle numberSpare part
DSQC10303HAC065147-001DSQC1030 Digital slot cover
3HAC058663-001Scalable I/O Digital base [3032-1]
3HAC060919-001Connectors digital base/add on
Harness K5.1.X5 - Adapter3HAC064092-001Harness Ethernet with Mini-IO
Required tools and equipment
NoteArticle numberEquipment
Content is defined in section
Standard toolkit for controller on
page 570.
-Standard toolkit
-ESD protective wrist band
Continues on next page
308 Product manual - OmniCore C30
3HAC060860-001 Revision: P
© Copyright 2019-2022 ABB. All rights reserved.
5 Repair
5.2.7 Replacing the scalable I/O unit
To Next Page
Loading...
