3.8.3 Installing Integrated Vision
Overview
The Integrated Vision is installed as shown in the following illustration.
xx1800003413
EthernetA
24V power supply from the customer power supply to the switch and to the
cameras
B
Required parts
Note
The spare part numbers that are listed in the table can be out of date. See the
latest spare parts of the OmniCore C30 via myABB Business Portal,
www.abb.com/myABB.
NoteArticle numberSpare part
3HAC053944-0018 mm camera lens, LTC-08F
3HAC053944-00212.5 mm camera lens, LFC-12.5F
3HAC053944-00316 mm camera lens, LFC-16F1
3HAC053944-00425 mm camera lens, LFC-25F1
DSQC10203HAC053953-001Integr Vision camera med. Res
DSQC10213HAC053954-001Integr Vision camera high res
Continues on next page
Product manual - OmniCore C30 197
3HAC060860-001 Revision: P
© Copyright 2019-2022 ABB. All rights reserved.
3 Installation and commissioning
3.8.3 Installing Integrated Vision
To Next Page
Loading...
