ABB OmniCore C30 User Manual

Mounting the bracket for the emergency stop on the FlexPendant holder
The FlexPendant holder is shipped without the bracket for the emergency stop
assembled to the holder. They are separated as two parts.
xx2100000767
Use this procedure to mount the bracket for the emergency stop to the FlexPendant
holder.
Note/illustrationAction
xx2000002356
Remove the four screws.1
Separate the rear part from the FlexPend-
ant holder.
2
Continues on next page
76 Product manual - OmniCore C30
3HAC060860-001 Revision: P
© Copyright 2019-2022 ABB. All rights reserved.
3 Installation and commissioning
3.4.6 Mounting the FlexPendant holder
Continued

ABB OmniCore C30 Specifications

General

Brand	ABB
Model	OmniCore C30
Category	Controller
Language	English