ABB OmniCore C30 - Page 72

Info/illustrationAction
BD A E
C
xx1800000377
Desktop mounting kit top coverA
Left side cover unitB
Right side cover unitC
Torx countersunk screw M3x6 (6
pcs)
Tightening torque: 0.6-0.8 Nm
D
Torx countersunk screw M4x10 (8
pcs)
Tightening torque: 1.7-1.8 Nm
E
Assemble the desktop mounting kit top
cover.
2
Assemble the side covers with adapter
cables and fasten them with screws on the
top.
3
Continues on next page
72 Product manual - OmniCore C30
3HAC060860-001 Revision: P
© Copyright 2019-2022 ABB. All rights reserved.
3 Installation and commissioning
3.4.5 Mounting the controller with desktop mounting kit [3001-2]
Continued