Check:
• all connections to the replaced part
• power supplies
• that the correct part has been fitted
• the last repair documents.
The robot has recently
been repaired
Check:
• software versions
• compatibilities between hardware and software
• options and their configuration
The robot recently had a
software upgrade
Check:
• connections
• software versions
The robot has recently
been moved from one site
to another (an already
working robot)
500 Product manual - OmniCore C30
3HAC060860-001 Revision: P
© Copyright 2019-2022 ABB. All rights reserved.
6 Troubleshooting
6.1 Introduction to troubleshooting
Continued
To Next Page
Loading...
