5.2.3.1.3 Replacing the standard size silent fan unit
Removing the standard size silent fan unit
Preparations
Note/IllustrationAction
DANGER
Before doing any work inside the cabinet,
disconnect the mains power. For more
information, see Electrical safety on
page 31.
1
Location of wrist strap button:
xx1800000683
ELECTROSTATIC DISCHARGE
(ESD)
The unit is sensitive to ESD. Before
handling the unit read the safety inform-
ation in section The unit is sensitive to
ESD on page 47.
2
Removing the controller covers on page 222.Remove the top and right covers of the
controller.
3
Removing the standard size silent fan unit
Note/IllustrationAction
Disconnect standard fan:
• G1.X2-K2.X17
1
Continues on next page
Product manual - OmniCore C30 247
3HAC060860-001 Revision: P
© Copyright 2019-2022 ABB. All rights reserved.
5 Repair
5.2.3.1.3 Replacing the standard size silent fan unit
To Next Page
Loading...
