Note/IllustrationAction
xx1800000483
Refit the fan bracket into the cabinet.4
Screws: Torx, countersunk screw M4x10 (2
pcs)
xx1800000484
Secure it with the screws.5
Concluding procedure
Note/IllustrationAction
Refitting the top cover on page 230Refit the top cover.1
Perform the function tests to verify that
the safety features work properly, see
Function tests on page 212.
2
166 Product manual - OmniCore C30
3HAC060860-001 Revision: P
© Copyright 2019-2022 ABB. All rights reserved.
3 Installation and commissioning
3.7.4 Installing the power supply optional device and the harness 24 V extension
Continued
To Next Page
Loading...
