ABB OmniCore C30 - Page 230

Refitting the top cover
Info/illustrationAction
Screws: Torx, countersunk screw M4x10 (8
pcs)
A
A
xx1700001893
Refit the top cover using the location
pins.
1
Secure it with the screws.2
Location pinsA
Refitting the rear cover
Info/illustrationAction
Screws: Torx, countersunk screw M4x10 (6
pcs)
xx1800000471
Refit the the rear cover.1
Secure it with the screws.2
230 Product manual - OmniCore C30
3HAC060860-001 Revision: P
© Copyright 2019-2022 ABB. All rights reserved.
5 Repair
5.2.1 Opening the robot controller
Continued