ABB OmniCore C30 - Page 114

A protective stop device needs to be connected to the protective stop input. See
example below.
14
1
3
15
10
12
11
9
16
K2.X14
0V_CH1_CH2
24V_CH1
AS1+ / GS1+
AS1- / GS1-
0V_CH1_CH2
24V_CH2
Customer provided
protec!ve stop device
AS2+ / GS2+
AS2- / GS2-
xx2100002262
The protective stop input can be powered from an external power supply:
Customer_24V_CH1
Customer_24V_CH2
Customer_0V_CH1
Customer_0V_CH2
Customer provided power
0V_CH1_CH2
24V_CH1
0V_CH1_CH2
24V_CH2
K2.X14
AS1+ / GS1+
AS1- / GS1-
AS2+ / GS2+
AS2- / GS2-
14
13
15
10
12
11
9
16
Customer provided
protec!ve stop device
xx2100002264
Continues on next page
114 Product manual - OmniCore C30
3HAC060860-001 Revision: P
© Copyright 2019-2022 ABB. All rights reserved.
3 Installation and commissioning
3.5.8 Descriptions for connectors
Continued