Installing the harness 24 V extension
Note/IllustrationAction
Screws: Torx, countersunk screw M4x10 (2
pcs)
xx1800000742
Insert the harness into the front panel
from inside of the cabinet and secure the
screws.
1
Connect:
• X45 - T5.X2.
2
xx1900001006
Insert the cables into the clips on the
bottom of the cabinet.
3
Refitting the main computer assembly with process plate to the cabinet
Note/IllustrationAction
DANGER
Before doing any work inside the cabinet,
disconnect the mains power. For more
information, see Electrical safety on
page 31.
1
Continues on next page
Product manual - OmniCore C30 159
3HAC060860-001 Revision: P
© Copyright 2019-2022 ABB. All rights reserved.
3 Installation and commissioning
3.7.4 Installing the power supply optional device and the harness 24 V extension
Continued
To Next Page
Loading...
