Removing the axis computer
Note/IllustrationAction
xx1800000473
Remove the bracket screws.1
xx1800000474
Remove the axis computer.2
Refitting the axis computer
Refitting the axis computer
Note/IllustrationAction
Screws: Torx pan head screw M4x8 (4 pcs)
xx1800000475
Refit the axis computer to the bracket
and secure the screws.
1
Refitting the axis computer to the frame
Note/IllustrationAction
DANGER
Before doing any work inside the cabinet,
disconnect the mains power. For more
information, see Electrical safety on
page 31.
1
Continues on next page
234 Product manual - OmniCore C30
3HAC060860-001 Revision: P
© Copyright 2019-2022 ABB. All rights reserved.
5 Repair
5.2.2 Replacing the axis computer
Continued
To Next Page
Loading...
