Note/IllustrationAction
xx1800000496
Hook up the connected services gateway
to the bracket and push carefully into
position.
Note
During the installation, the gap between
the lower surface of the connected ser-
vices gateway and the upper surface of
the main computer should be zero.
3
xx1800000497
TOP VIEW
Reconnect:
• K7.X1 - K2.X3
i
• K7.X2 - A2.X5
4
i
For connected services gateway wired, there is no power cable.
Refitting the small fan
Note/IllustrationAction
DANGER
Before doing any work inside the cabinet,
disconnect the mains power. For more
information, see Electrical safety on
page 31.
1
Continues on next page
Product manual - OmniCore C30 305
3HAC060860-001 Revision: P
© Copyright 2019-2022 ABB. All rights reserved.
5 Repair
5.2.6 Replacing the connected services gateway
Continued
To Next Page
Loading...
