ABB OmniCore C30 - Page 395

Note/IllustrationAction
xx1800003415
Remove the attachment screws and take
the cover off.
2
A
B
xx1800003419
Card slotsA
Guide railB
Remove the attachment screw on the
fieldbus master and take out the fieldbus
master.
Note
Be careful when you pull it out from the
card slot.
3
Refitting the fieldbus master
Preparations
Note/IllustrationAction
DANGER
Before doing any work inside the cabinet,
disconnect the mains power. For more
information, see Electrical safety on
page 31.
1
Continues on next page
Product manual - OmniCore C30 395
3HAC060860-001 Revision: P
© Copyright 2019-2022 ABB. All rights reserved.
5 Repair
5.2.13 Replacing the fieldbus master
Continued