Foot dimensions
The following illustration shows the dimensions between the feet of the OmniCore
C30 controller, as seen from below.
36 mm
31 mm 40 mm
233 mm139.5 mm
184.5 mm 192.5 mm
xx1700001056
• The feet should only be used for positioning, not for mounting or fastening.
60 Product manual - OmniCore C30
3HAC060860-001 Revision: P
© Copyright 2019-2022 ABB. All rights reserved.
3 Installation and commissioning
3.4.1 Required installation space
Continued
To Next Page
Loading...
