Note/IllustrationAction
xx1900001878
Remove the assembly from the mounting
plate.
Note
Avoid colliding with the frame when re-
moving the unit.
ELECTROSTATIC DISCHARGE
(ESD)
When handling the computer outside of
the controller, use the wrist strap button
located on the side of the computer.
3
xx1900001885
i
For Connected Services Gateway wired, there is no power cable.
Removing the robot signal exchange proxy
Note/IllustrationAction
Location of wrist strap button:
ELECTROSTATIC DISCHARGE
(ESD)
When handling the computer outside of
the controller, use the wrist strap button
located on the side of the computer.
1
xx2000000419
Continues on next page
Product manual - OmniCore C90XT 125
3HAC073706-001 Revision: D
© Copyright 2020-2021 ABB. All rights reserved.
3 Installation and commissioning
3.7.6 Installing the fieldbus master
Continued
To Next Page
Loading...
