ABB Remote I/O RIO600 - Page 205

Reg A Scale IEC 61850 name SA name Description Values
88 .AnIn1.range/.An
In2.range
RTD 2- Channel Range Information
Channel - 2 (High Byte)
Channel - 1 (Low Byte)
Normal – 0;
High – 1;
Low – 2;
High High – 3;
Low Low – 4;
89
.AnIn3.range/.An
In4.range
RTD 2- Channel Range Information
Channel - 4 (High Byte)
Channel - 3 (Low Byte)
Normal – 0;
High – 1;
Low – 2;
High High – 3;
Low Low – 4;
90
<reserved> <reserved> 0
91 <reserved> <reserved> 0
92 <reserved> <reserved> 0
93 <reserved> <reserved> 0
94 <reserved> <reserved> 0
95 <reserved> <reserved> 0
LD0.RTDGGIO3
96 Value reported with a scale
factor of "1" when channel
configured as dimensionless
and with a scale factor of "100"
when channel configured as
either mA or RTD
.AnIn1.mag.f
RTD 3-Channel 1 Input Value -40...200 [°C]/0.0...20.0
[mA]/-10000...10000
1)
97 .AnIn2.mag.f RTD 3-Channel 2 Input Value -40...200 [°C]/0.0...20.0
[mA]/-10000...10000
1)
98 .AnIn3.mag.f RTD 3-Channel 3 Input Value -40...200 [°C]/0.0...20.0
[mA]/-10000...10000
1)
99 .AnIn4.mag.f RTD 3-Channel 4 Input Value -40...200 [°C]/0.0...20.0
[mA]/-10000...10000
1)
100 <reserved> <reserved> 0
101 <reserved> <reserved> 0
102 <reserved> <reserved> 0
103 <reserved> <reserved> 0
104 .AnIn1.range/.An
In2.range
RTD 3- Channel Range Information
Channel - 2 (High Byte)
Channel - 1 (Low Byte)
Normal – 0;
High – 1;
Low – 2;
High High – 3;
Low Low – 4;
105
.AnIn3.range/.An
In4.range
RTD 3- Channel Range Information
Channel - 4 (High Byte)
Channel - 3 (Low Byte)
Normal – 0;
High – 1;
Low – 2;
High High – 3;
Low Low – 4;
106
<reserved> <reserved> 0
107 <reserved> <reserved> 0
108 <reserved> <reserved> 0
109 <reserved> <reserved> 0
110 <reserved> <reserved> 0
111 <reserved> <reserved> 0
LD0.RTDGGIO4
Table continues on next page
1MRS757488 H Section 7
Modbus TCP communication
RIO600 197
Installation and Commissioning Manual