ABB Remote I/O RIO600 - Page 209

Reg A Scale IEC 61850 name SA name Description Values
185 .AnIn3.range/.An
In4.range
RTD 8- Channel Range Information
Channel - 4 (High Byte)
Channel - 3 (Low Byte)
Normal – 0;
High – 1;
Low – 2;
High High – 3;
Low Low – 4;
186
<reserved> <reserved> 0
187 <reserved> <reserved> 0
188 <reserved> <reserved> 0
189 <reserved> <reserved> 0
190 <reserved> <reserved> 0
191 <reserved> <reserved> 0
LD0.RTDGGIO9
192 Value reported with a scale
factor of "1" when channel
configured as dimensionless
and with a scale factor of "100"
when channel configured as
either mA or RTD
.AnIn1.mag.f
RTD 9-Channel 1 Input Value -40...200 [°C]/0.0...20.0
[mA]/-10000...10000
1)
193 .AnIn2.mag.f RTD 9-Channel 2 Input Value -40...200 [°C]/0.0...20.0
[mA]/-10000...10000
1)
194 .AnIn3.mag.f RTD 9-Channel 3 Input Value -40...200 [°C]/0.0...20.0
[mA]/-10000...10000
1)
195 .AnIn4.mag.f RTD 9-Channel 4 Input Value -40...200 [°C]/0.0...20.0
[mA]/-10000...10000
1)
196 <reserved> <reserved> 0
197 <reserved> <reserved> 0
198 <reserved> <reserved> 0
199 <reserved> <reserved> 0
200 .AnIn1.range/.An
In2.range
RTD 9- Channel Range Information
Channel - 2 (High Byte)
Channel - 1 (Low Byte)
Normal – 0;
High – 1;
Low – 2;
High High – 3;
Low Low – 4;
201
.AnIn3.range/.An
In4.range
RTD 9- Channel Range Information
Channel - 4 (High Byte)
Channel - 3 (Low Byte)
Normal – 0;
High – 1;
Low – 2;
High High – 3;
Low Low – 4;
202
<reserved> <reserved> 0
203 <reserved> <reserved> 0
204 <reserved> <reserved> 0
205 <reserved> <reserved> 0
206 <reserved> <reserved> 0
207 <reserved> <reserved> 0
LD0.RTDGGIO1
0
Table continues on next page
1MRS757488 H Section 7
Modbus TCP communication
RIO600 201
Installation and Commissioning Manual