ABB RET670 - Page 797

Table 231: A4RADR Non group settings (basic)
Name Values (Range) Unit Step Default Description
Operation31 Disabled
Enabled
- - Disabled Operation On/off
NomValue31 0.0 - 999999.9 - 0.1 0.0 Nominal value for analog channel 31
UnderTrigOp31 Disabled
Enabled
- - Disabled Use under level trig for analog cha 31 (on) or
not (off)
UnderTrigLe31 0 - 200 % 1 50 Under trigger level for analog cha 31 in % of
signal
OverTrigOp31 Disabled
Enabled
- - Disabled Use over level trig for analog cha 31 (on) or
not (off)
OverTrigLe31 0 - 5000 % 1 200 Over trigger level for analog cha 31 in % of
signal
Operation32 Disabled
Enabled
- - Disabled Operation On/off
NomValue32 0.0 - 999999.9 - 0.1 0.0 Nominal value for analog channel 32
UnderTrigOp32 Disabled
Enabled
- - Disabled Use under level trig for analog cha 32 (on) or
not (off)
UnderTrigLe32 0 - 200 % 1 50 Under trigger level for analog cha 32 in % of
signal
OverTrigOp32 Disabled
Enabled
- - Disabled Use over level trig for analog cha 32 (on) or
not (off)
OverTrigLe32 0 - 5000 % 1 200 Over trigger level for analog cha 32 in % of
signal
Operation33 Disabled
Enabled
- - Disabled Operation On/off
NomValue33 0.0 - 999999.9 - 0.1 0.0 Nominal value for analog channel 33
UnderTrigOp33 Disabled
Enabled
- - Disabled Use under level trig for analog cha 33 (on) or
not (off)
UnderTrigLe33 0 - 200 % 1 50 Under trigger level for analog cha 33 in % of
signal
OverTrigOp33 Disabled
Enabled
- - Disabled Use over level trig for analog cha 33 (on) or
not (off)
OverTrigLe33 0 - 5000 % 1 200 Overtrigger level for analog cha 33 in % of
signal
Operation34 Disabled
Enabled
- - Disabled Operation On/off
NomValue34 0.0 - 999999.9 - 0.1 0.0 Nominal value for analog channel 34
UnderTrigOp34 Disabled
Enabled
- - Disabled Use under level trig for analog cha 34 (on) or
not (off)
UnderTrigLe34 0 - 200 % 1 50 Under trigger level for analog cha 34 in % of
signal
OverTrigOp34 Disabled
Enabled
- - Disabled Use over level trig for analog cha 34 (on) or
not (off)
Table continues on next page
1MRK504116-UUS C Section 3
IED application
791
Application manual