ABB RET670 - Page 796

Name Values (Range) Unit Step Default Description
UnderTrigOp07 Disabled
Enabled
- - Disabled Use under level trig for analog cha 7 (on) or
not (off)
UnderTrigLe07 0 - 200 % 1 50 Under trigger level for analog cha 7 in % of
signal
OverTrigOp07 Disabled
Enabled
- - Disabled Use over level trig for analog cha 7 (on) or
not (off)
OverTrigLe07 0 - 5000 % 1 200 Over trigger level for analog cha 7 in % of signal
Operation08 Disabled
Enabled
- - Disabled Operation On/Off
NomValue08 0.0 - 999999.9 - 0.1 0.0 Nominal value for analog channel 8
UnderTrigOp08 Disabled
Enabled
- - Disabled Use under level trig for analog cha 8 (on) or
not (off)
UnderTrigLe08 0 - 200 % 1 50 Under trigger level for analog cha 8 in % of
signal
OverTrigOp08 Disabled
Enabled
- - Disabled Use over level trig for analog cha 8 (on) or
not (off)
OverTrigLe08 0 - 5000 % 1 200 Over trigger level for analog cha 8 in % of signal
Operation09 Disabled
Enabled
- - Disabled Operation On/Off
NomValue09 0.0 - 999999.9 - 0.1 0.0 Nominal value for analog channel 9
UnderTrigOp09 Disabled
Enabled
- - Disabled Use under level trig for analog cha 9 (on) or
not (off)
UnderTrigLe09 0 - 200 % 1 50 Under trigger level for analog cha 9 in % of
signal
OverTrigOp09 Disabled
Enabled
- - Disabled Use over level trig for analog cha 9 (on) or
not (off)
OverTrigLe09 0 - 5000 % 1 200 Over trigger level for analog cha 9 in % of signal
Operation10 Disabled
Enabled
- - Disabled Operation On/Off
NomValue10 0.0 - 999999.9 - 0.1 0.0 Nominal value for analog channel 10
UnderTrigOp10 Disabled
Enabled
- - Disabled Use under level trig for analog cha 10 (on) or
not (off)
UnderTrigLe10 0 - 200 % 1 50 Under trigger level for analog cha 10 in % of
signal
OverTrigOp10 Disabled
Enabled
- - Disabled Use over level trig for analog cha 10 (on) or
not (off)
OverTrigLe10 0 - 5000 % 1 200 Over trigger level for analog cha 10 in % of
signal
Section 3 1MRK504116-UUS C
IED application
790
Application manual