72
Testing blood glucose3
To obtain blood with the lancing device, you rst need
to prime it.
Do not prime the lancing device until you are
ready to obtain blood. Storing the lancing device
in this primed state can cause parts to become
misshapen through tension, impairing its oper-
ation.
1 To prime the lancing device, press the multifunc-
tion button down as far as it will go.
When you release the button one third will come out
again. The lancing device is now primed.
Do not press the multifunction button again until
you actually want to obtain blood. As the lancing
device is now primed, this would trigger the
lancet and could lead to accidental injury.
To Next Page
Loading...
