<System> (1/3)
Item Default Contents
● Meas Mode ：Normal ：Normal ：Normal measurement
Print ：Print
PC out ：Data management
Memory Call ：Display recorded data
L
Atm5
：Tact-max sound pressure level (STD card)
Remote U ：Communicate mode(USB)
Remote R ：Communicate mode(RS-232C）
● Data delete ：off ：Data deletion mode setting
off ：Date deletion is disabled. Fixed to off in Peak mode
3sec： Data in past 3 sec is deleted when
[Pause]
key is
pressed during the measurement.
5sec ： Data in past 5 sec is deleted when
[Pause]
key
is pressed during the measurement .
※The function is disabled for
Meas.Time
1, 3 or 5 sec,.
● LCD cont ：***** ：Adjustment of LCD contrast
See “LCD adjustment” section for the details.
● Date y/m/d ：00/01/01 ：Calendar setting (date: 2000/01/01)
See “Calendar adjustment” for the details.
● Time h/m/s ：00:00:00 ：Time setting
See the “Calendar adjustment” for the details.
● Printer(PC) set ：9600 ：Baud rate setting
USB Communicate ：9600/19200
RS-232C Communicate：9600/19200/38400
● USB out ：OFF ：Digital data output setting
OFF → L
p
→ L
pB
→ Wave
(Outputs data from USB out in parallel with the
measurement.)
OFF ：USB output is disabled.
L
p
：Outputs instantaneous value in every second
L
pB
：Outputs level data in each band when the octave
filter is used.
Wave ：Outputs level data in each band at sampling
rate 48kHz when the octave filter is used.
<System> 1/3
Mode ：Normal
Data delete：off
LCD cont ：＊＊＊
Date y/m/d ：00/00/00
Time h/m/s ：00:00:00
Printer(PC)set：9600
USB out ：OFF
To Next Page
Loading...
