ACO 6236 - Page 43

42
≪Interval ： Repeat At time of setting≫
After progress of registered record start time (Sta), if instantaneous value is beyond a setting
level, record it during one second by setting time.
It records Meas.Time or Samp Time intervals repeatedly.
Level of instantaneous value is less than a setting level or records it until record stop time.
＜ Standby screen ＞ ＜ During a measurement ＞
↑
Default screen
The Stp blinks when
[Start/Stop]
Key is pressed to confirm the stand-by state.
１０ｍ ０００ｈ００ｍ００ｓ
６３．５
ｄＢ
Stp A Fast Lp
40 AUTO 130
１０ｍ ０００ｈ００ｍ００ｓ
６３．５
ｄＢ
Rec A Fast Lp
40 AUTO 130
Start
Record start
Record end
MeasTime or Samp Time
St
p
１
2
3
4
Start
MeasTime or Samp Time
１
2
3
4
Stp
Record start
Record end
【※CAUTION】
The record doesn't stop until the
[Start/Stop]
key is pushed by
"Interval:Single"
,
"Samp Time:Meas.Time"
, and
"Meas.Time:***"
.
Instantaneous setting value
Instantaneous setting value